Linux version 2.6.26-rc8 (mafra@localhost) (gcc version 4.2.3 (4.2.3-6mnb1)) #111 SMP Sat Jun 28 13:48:55 BRT 2008
Command line: BOOT_IMAGE=2.6.26-rc8 root=UUID=019b9dde-30e6-11dd-b550-3d3d11ee558f resume=/dev/sda6 splash=silent vga=0x0364
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
 BIOS-e820: 000000007f6d0000 - 000000007f6e0000 (ACPI data)
 BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS)
 BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 521936) 1 entries of 256 used
max_pfn_mapped = 1048576
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
init_memory_mapping
DMI present.
ACPI: RSDP 000F8060, 0024 (r2 PTLTD )
ACPI: XSDT 7F6D7E0E, 008C (r1   Sony     VAIO 20070704 PTL         0)
ACPI: FACP 7F6DFC04, 00F4 (r3   Sony     VAIO 20070704 PTL         1)
ACPI: DSDT 7F6D9217, 6979 (r2   Sony     VAIO 20070704 PTL  20050624)
ACPI: FACS 7F6E2FC0, 0040
ACPI: APIC 7F6DFCF8, 0068 (r1   Sony     VAIO 20070704 PTL        5A)
ACPI: HPET 7F6DFD60, 0038 (r1   Sony     VAIO 20070704 PTL        5A)
ACPI: MCFG 7F6DFD98, 003C (r1   Sony     VAIO 20070704 PTL        5A)
ACPI: SLIC 7F6DFDD4, 0176 (r1   Sony     VAIO 20070704 PTL   1000000)
ACPI: TMOR 7F6DFF4A, 0026 (r1   Sony     VAIO 20070704 PTL         3)
ACPI: APIC 7F6DFF70, 0068 (r1   Sony     VAIO 20070704 PTL         0)
ACPI: BOOT 7F6DFFD8, 0028 (r1   Sony     VAIO 20070704 PTL         1)
ACPI: SSDT 7F6D90FA, 011D (r1   Sony     VAIO 20070704 PTL  20050624)
ACPI: SSDT 7F6D8FD7, 0123 (r1   Sony     VAIO 20070704 PTL  20050624)
ACPI: SSDT 7F6D8482, 0287 (r1   Sony     VAIO 20070704 PTL  20050624)
ACPI: SSDT 7F6D83CE, 00B4 (r1   Sony     VAIO 20070704 PTL  20050624)
ACPI: SSDT 7F6D7E9A, 0534 (r1   Sony     VAIO 20070704 PTL  20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: DMI detected: Sony
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 521936) 1 entries of 256 used
  early res: 0 [0-fff] BIOS data page
  early res: 1 [6000-7fff] TRAMPOLINE
  early res: 2 [200000-69b7ef] TEXT DATA BSS
  early res: 3 [37d51000-37fefcd6] RAMDISK
  early res: 4 [9f800-fffff] BIOS reserved
  early res: 5 [8000-bfff] PGTABLE
 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0:        0 ->      159
    0:      256 ->   521936
On node 0 totalpages: 521839
  DMA zone: 56 pages used for memmap
  DMA zone: 1284 pages reserved
  DMA zone: 2659 pages, LIFO batch:0
  DMA32 zone: 7080 pages used for memmap
  DMA32 zone: 510760 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 30704 bytes of per cpu data
NR_CPUS: 2, nr_cpu_ids: 2
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 513419
Kernel command line: BOOT_IMAGE=2.6.26-rc8 root=UUID=019b9dde-30e6-11dd-b550-3d3d11ee558f resume=/dev/sda6 splash=silent vga=0x0364
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
time.c: Detected 1995.003 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 2047444k/2087744k available (2572k kernel code, 39420k reserved, 1259k data, 236k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay using timer specific routine.. 3995.98 BogoMIPS (lpj=6655980)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080321
CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
Using local APIC timer interrupts.
APIC timer calibration result 12468768
Detected 12.468 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3991.25 BogoMIPS (lpj=6650013)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7986.24 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1
  groups: 1 0
net_namespace: 392 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE storm detected, disabling EC GPE
ACPI: EC: missing confirmations, switch off interrupt mode.
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe7f has been reserved
system 00:06: ioport range 0xfe80-0xfeff has been reserved
PCI: region 0000:09:03.0/9 too large: 0x0000000000000000-0x0000000003ffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 2000-2fff
  MEM window: 0xf6000000-0xf7ffffff
  PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
PCI: Bridge: 0000:00:1c.1
  IO window: 3000-3fff
  MEM window: 0xf8000000-0xf9ffffff
  PREFETCH window: 0x00000000f2000000-0x00000000f3ffffff
PCI: Bridge: 0000:00:1c.2
  IO window: 4000-4fff
  MEM window: 0xfa000000-0xfbffffff
  PREFETCH window: 0x00000000f4000000-0x00000000f5ffffff
PCI: Bridge: 0000:00:1c.4
  IO window: 5000-5fff
  MEM window: 0xfc200000-0xfc2fffff
  PREFETCH window: disabled.
PCI: Bus 10, cardbus bridge: 0000:09:03.0
  IO window: 0x00006000-0x000060ff
  IO window: 0x00006400-0x000064ff
  MEM window: 0x8c000000-0x8fffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 6000-6fff
  MEM window: 0xfc300000-0xfc3fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:09:03.0[A] -> GSI 16 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 2683k freed
Simple Boot Flag at 0x36 set to 0x1
msgmni has been set to 4005
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 4000k, total 7616k
vesafb: mode is 1280x800x16, linelength=2560, pages=2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: device:08 is registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/input/input2
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
ACPI: SSDT 7F6D8C52, 02A1 (r1   Sony     VAIO 20070704 PTL  20050624)
ACPI: SSDT 7F6D8709, 04B7 (r1   Sony     VAIO 20070704 PTL  20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device1
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7F6D8EF3, 00E4 (r1   Sony     VAIO 20070704 PTL  20050624)
ACPI: SSDT 7F6D8BC0, 0092 (r1   Sony     VAIO 20070704 PTL  20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device2
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (48 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (48 C)
hpet_resources: 0xfed00000 is busy
Generic RTC Driver v1.07
Linux agpgart interface v0.103
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets
intelfb: Version 0.9.5
intelfb: Cannot reserve FB region.
ACPI: PCI Interrupt 0000:09:03.2[C] -> GSI 18 (level, low) -> IRQ 18
sony-laptop: Sony Notebook Control Driver v0.6.
input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:29/SNY5001:00/input/input3
input: Sony Vaio Jogdial as /devices/virtual/input/input4
sony-laptop: detected Sony Vaio FZ Series
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
Marking TSC unstable due to TSC halts in idle
sdhci: Copyright(c) Pierre Ossman
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
Advanced Linux Sound Architecture Driver Version 1.0.16.
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Freeing unused kernel memory: 236k freed
input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc604800
Clocksource tsc unstable (delta = -259250240 ns)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc604c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
usb 1-2: new high speed USB device using ehci_hcd and address 2
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
No dock devices found.
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part 
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfc604000 port 0xfc604100 irq 19
ata2: DUMMY
ata3: DUMMY
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ATA-8: FUJITSU MHX2250BT, 0041000B, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/90:03:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHX2250B 0041 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata4.00: ATAPI: SONY    DVD RW AW-G540A, 1.W0, max UDMA/33
ata4.00: configured for UDMA/33
isa bounce pool size: 16 pages
scsi 3:0:0:0: CD-ROM            SONY     DVD RW AW-G540A  1.W0 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:08:00.0 to 64
sky2 0000:08:00.0: v1.21 addr 0xfc200000 irq 16 Yukon-FE (0xb7) rev 1
sky2 eth0: addr 00:1a:80:4a:7f:37
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.26k
iwl4965: Copyright(c) 2003-2008 Intel Corporation
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:06:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels
phy0: Selected rate control algorithm 'iwl-4965-rs'
ACPI: PCI interrupt for device 0000:06:00.0 disabled
input: 4965AGN as /devices/pci0000:00/0000:00:1c.2/0000:06:00.0/input/input8
ACPI: PCI Interrupt 0000:09:03.1[B] -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[fc302000-fc3027ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Non-volatile memory driver v1.2
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460302903fd0]
EXT3 FS on sda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: module loaded
Adding 4281280k swap on /dev/sda6.  Priority:-1 extents:1 across:4281280k
sky2 eth0: enabling interface
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 40100102, writing 40100106)
firmware: requesting iwlwifi-4965-1.ucode
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:15:e9:02:f5:aa
wlan0: RX authentication from 00:15:e9:02:f5:aa (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:02:f5:aa
wlan0: associate with AP 00:15:e9:02:f5:aa
wlan0: RX AssocResp from 00:15:e9:02:f5:aa (capab=0x421 status=0 aid=2)
wlan0: associated
wlan0: CTS protection enabled (BSSID=00:15:e9:02:f5:aa)
tifm_core: MMC/SD card detected in socket 0:1
mmc0: new SD card at address e341
mmcblk0: mmc0:e341 S512B 483840KiB 
 mmcblk0: p1
wlan0: RX deauthentication from 00:15:e9:02:f5:aa (reason=6)
wlan0: deauthenticated
wlan0: authenticate with AP 00:15:e9:02:f5:aa
wlan0: authenticate with AP 00:15:e9:02:f5:aa
wlan0: RX authentication from 00:15:e9:02:f5:aa (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:15:e9:02:f5:aa
wlan0: associate with AP 00:15:e9:02:f5:aa
wlan0: RX ReassocResp from 00:15:e9:02:f5:aa (capab=0x421 status=0 aid=2)
wlan0: associated
wlan0: CTS protection enabled (BSSID=00:15:e9:02:f5:aa)
tifm0 : demand removing card from socket 0:1
mmc0: card e341 removed